سانچہ:Location map/دستاویز

This template generates a location map as a composite image consisting of a map and a location mark. Optionally a label and caption can be added.

Usage

Map image files are not accessed directly but by using an auxiliary map definition template. For example, if the first unnamed parameter supplied to this template is "Japan", then this template uses the auxiliary template,

{{Location map Japan}} which contains the data needed to generate the composite image.

Please note

• Assigning any value to the parameter caption causes the map to be displayed as a thumbnail image. If this parameter is not declared, the template will generate a default caption.
• The coordinates are not checked. If the coordinates specified fall outside the area covered by the map image, the location mark will not display inside the image, however, it may be displayed somewhere else on the page.
• Do not use px. Using width=200px will usually cause a very large map to be displayed. Use width=200.
• To create a map with more than one location mark use

{{Location map+}} or

{{Location map many}}.

Blank templates

Location of Yellowstone in the northwestern United States

Decimal degrees		Degrees, minutes, seconds
{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = | link = | lat_deg = | lon_deg = }}		{{Location map | {{{1}}} | width = | float = | border = | caption = | alt = | relief = | AlternativeMap = | overlay_image = | label = | label_size = | position = | background = | mark = | marksize = | link = | lat_deg = | lat_min = | lat_sec = | lat_dir = | lon_deg = | lon_min = | lon_sec = | lon_dir = }}

Parameters

Map display parameters
Parameter	Description
{{{1}}}	Required. Use the name of the map as the first unnamed parameter. For example, specify England to use the values in {{Location map England}}. See the examples below.
width	Determines the width of the map in pixels, overriding any default values. Do not include px, for example: width=300, not width=300px.
default_width	Determines the default width of the map in pixels, intended for use by templates e.g. place infoboxes. The default value is 240. Do not include px. This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example if default_width=200 is given, a map of Thailand will be displayed with a width of 200 * 0.57 = 114 pixels (as specified in Template:Location map Thailand).
float	Specifies the position of the map on the page. Valid values are left, right, center and none. The default is right.
border	Specifies the color of the 1px map border. The default is lightgrey (see web colors). If set to none, no border will be generated. This parameter is seldom used.
caption	The text of a caption to be displayed below the map. Specifying a caption will cause the map to be displayed with a frame. If caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the label parameter (or the current page name if label not defined) and the name parameter from map definition template. See the examples below.
alt	Alt text for map; used by screen readers, see WP:ALT.
relief	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1, which is usually a relief map. See the example at Location map+/relief.
AlternativeMap	Allows the use of an alternative map. The image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap.
overlay_image	Allows an overlay to be superimposed on the map. This parameter is seldom used. See the example at Location map+/overlay.
Label and mark parameters
Parameter	Description
label	The text of the label to display next to the mark. A wiki link can be used. The default if not specified is no label, just the marker.
label_size	The font size to use for the label, given as a percentage of the normal font size (<100 = smaller, >100 = larger). The default is 90. Do not include %, for example: label_size=80, not label_size=80%.
label_width	The width to use for the label, given as an em size. The default is 6. Do not include em, for example: label_width=7, not label_width=7em.
position	The position of the label relative to the mark. Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
background	The background color to use for the label. See Web colors. The default is no background color, which shows the map image behind the label.
mark	The name of an image to display as the mark. The default is Green pog.svg (). See examples at Commons:Location markers and Commons:Category:Map icons.
marksize	The size of the mark in pixels. The default is 8. Do not include px, for example: marksize=10, not marksize=10px.
link	Specifies a wiki link which will be followed if the reader clicks on the mark. The name of the linked article is displayed when the mouse pointer hovers over the mark.
lat_deg	Required. The degrees of latitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.
lat_min	The minutes of latitude.
lat_sec	The seconds of latitude. Usually not necessary.
lat_dir	N if north (default value) or S for south of the Equator. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for southern latitude).
lon_deg	Required. The degrees of longitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.
lon_min	The minutes of longitude.
lon_sec	The seconds of longitude. Usually not necessary.
lon_dir	E for east (default value) or W for west of the Prime Meridian. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for western longitude).

Available map templates

There are over 1000 map templates available. To find other templates:

• Template:Location map/List - some of the items listed here are redirects and a few templates may not function as expected
• Category:Location map templates - templates sorted by category
• Special:WhatLinksHere/Template:Location map/Info - a search that might help
• Special:Prefixindex/Template:Location map - another search that might help

Creating new map definition templates

See Creating a new map template.

Examples

Default width and float, no label, default caption (decimal coordinates)

Note: When a label is not specified, the default caption is "Page name (Map name)", so if this example was viewed on a page named Pag, the default caption would be "Pag (Croatia)". Likewise, on a page named Pag (town), the default caption would be "Pag (town) (Croatia)".

{{Location map | Croatia
| alt     = Pag is on an island.
| lat_deg = 44.44
| lon_deg = 15.05
}}

Map with the default caption (degrees/minutes)

Note: When a label is specified, the default caption is "Label text (Map name)", seen as "Pag (Croatia)" in this example.

{{Location map | Croatia
| width = 200
| float = right
| alt = Pag is on an island.
| label = Pag
| position = right
| mark = Green pog.svg <!--green dot-->
| lat_deg = 44 | lat_min = 26 <!-- default: lat_dir = N -->
| lon_deg = 15 | lon_min = 3  <!-- default: lon_dir = E -->
}}

Mark outside of map border, no caption

{{Location map | Croatia
| width    = 200
| float    = right
| caption  =
| alt      = Rimini in Italy (outside the map)
| lat_deg  = 44.05
| lon_deg  = 12.57 <!--outside map's left border at 13.1-->
| label    = Rimini
| position = right
}}

Caption, label_size, background, mark, marksize

Rimini

Location of Rimini in Italy

{{Location map | Italy
| width      = 200
| float      = right
| caption    = Location of Rimini in Italy
| alt        = Map of Italy with mark showing location of Rimini
| label      = Rimini
| label_size = 150 <!--150% of normal size-->
| position   = bottom
| background = orange
| mark       = Orange_pog.svg
| marksize   = 12 <!--size in pixels-->
| lat_deg    = 44.05
| lon_deg    = 12.57
}}

AlternativeMap parameter

Rome

Location of Rome in Italy

{{Location map | Italy
| AlternativeMap = Italy location map.svg
| width   = 200
| float   = right
| caption = Location of Rome in Italy
| alt     = Map of Italy with mark showing location of Rome
| label   = Rome
| lat_deg = 41.9
| lon_deg = 12.5
}}

Relief parameter

Also demonstrates automatic positioning of label to the left, due to far right position of mark.

{{Location map | Nepal
| relief = yes
| caption = Location of Biratnagar Airport in Nepal
| alt = Biratnagar Airport is located in southeastern Nepal
| label = Biratnagar
| mark = Airplane silhouette.svg
| marksize = 10
| lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N
| lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E
}}

{{Location map | Nepal
| relief = 
| caption = Location of Biratnagar Airport in Nepal
| alt = Biratnagar Airport is located in southeastern Nepal
| label = Biratnagar
| mark = Airplane silhouette.svg
| marksize = 10
| lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N
| lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E
}}

Same coordinates on different maps

{{Location map | UK Scotland
| relief = 1
| width = 180
| float = right
| caption = Lockerbie in Scotland, UK
| alt = Lockerbie is in southern Scotland.
| label = Lockerbie
| mark = Blue_pog.svg
| marksize = 9
| lat_deg = 55 | lat_min = 07 | lat_sec = 16 | lat_dir = N
| lon_deg = 03 | lon_min = 21 | lon_sec = 19 | lon_dir = W
}}

{{Location map | United Kingdom
| relief = 1
| width = 180
| float = right
| caption = Lockerbie in Scotland, UK
| alt = Lockerbie is in southern Scotland.
| label = Lockerbie
| mark = Blue_pog.svg
| marksize = 9
| lat_deg = 55 | lat_min = 07 | lat_sec = 16 | lat_dir = N
| lon_deg = 03 | lon_min = 21 | lon_sec = 19 | lon_dir = W
}}

Map that crosses 180° meridian

See Category:Location map templates crossing 180th meridian

{{Location map | Fiji
| width      = 180
| float      = right
| label      = Suva
| position   = right
| background = yellow
| mark       = Locator_Dot.png
| marksize   = 7
| lat_deg =  18 | lat_min =  8 | lat_sec = 0 | lat_dir = S
| lon_deg = 178 | lon_min = 26 | lon_sec = 0 | lon_dir = E
}}

Template data

This is the TemplateData documentation for this template used by VisualEditor and other tools.

Location map

This template places a location mark on a map.

Template parameters[سانچہ ڈیٹا دا پربندھ کرو]

Parameter		تفصیل	Type	حالت
Map template name	1	The name of the map template to be used	String	required
Map width	width	Determines the width of the map in pixels, overriding any default values. Do not include "px", for example: "300", not "300px".	Number	optional
Default width	default_width	Determines the default width of the map in pixels, intended for use by templates such as infoboxes. The default value is 240. Do not include "px". This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps.	Number	optional
Position	float	Specifies the position of the map on the page. Valid values are left, right, center and none. The default is right.	String	optional
Border color	border	Specifies the color of the map border. If set to none, no border will be generated.	String	optional
Map caption	caption	The text of a caption to be displayed below the map. If caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated.	String	optional
Alt text	alt	Alt text for map; used by screen readers.	String	optional
Alternative map from template	relief	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1, which is usually a relief map.	String	optional
Alternative map not from template	AlternativeMap	Allows the use of an alternative map. The image must have the same edge coordinates as the map template.	String	optional
Overlay image	overlay_image	Allows an overlay to be superimposed on the map. This parameter is seldom used.	String	optional
Marker label	label	The text of the label to display next to the mark. A wiki link can be used.	String	optional
Label size	label_size	The font size to use for the label, given as a percentage of the normal font size. Do not include "%".	Number	optional
Label width	label_width	The width to use for the label, given as an em size. Do not include "em".	Number	optional
Label position	position	The position of the label relative to the mark. Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.	String	optional
Label background	background	The background color to use for the label.	String	optional
Marker image	mark	The name of an image to display as the marker.	String	optional
Marker size	marksize	The size of the mark in pixels. Do not include "px".	Number	optional
Marker link	link	Specifies a wiki link which will be followed if the reader clicks on the mark.	String	optional
Latitude degrees	lat_deg	The degrees of latitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified.	Number	required
Latitude minutes	lat_min	The minutes of latitude.	Number	optional
Latitude seconds	lat_sec	The seconds of latitude.	Number	optional
Latitude direction	lat_dir	N if north or S for south of the Equator. Not required if using signed decimal degrees.	String	optional
Longitude degrees	lon_deg	The degrees of longitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified.	Number	required
Longitude minutes	lon_min	The minutes of longitude.	Number	optional
Longitude seconds	lon_sec	The seconds of longitude.	Number	optional
Longitude direction	lon_dir	E for east or W for west of the Prime Meridian. Not required if using signed decimal degrees.	String	optional